Do you have a light inside or outside your home that keeps burning out? When a light fixture keeps burning out it’s bulbs, it can be both frustrating and a major electrical problem. There can be a number of reasons why light bulbs will keep burning out and some reasons can be a sign of a major electrical issue that needs correcting to prevent a fire hazard. Simon Electric will share the main causes as to why light bulbs will burn out frequently and the solution.
Light Bulbs Overheating
Light bulbs will burn out within a very short period of time if the bulbs are the wrong wattage. If the light bulb wattage is under the limit for the light fixture, then the light bulbs will overheat and burn out. The light fixture requires the proper wattage light bulb or the light fixture will send too much energy to the light bulb filament. To prevent burning out the light bulbs make sure to use the proper wattage light bulb. It can sometimes be hard to determine an existing light fixture’s wattage. If you are using a 40 watt light bulb try using a 60 watt light bulb and see they last longer.
Light Bulbs Can Be Damaged By Vibration
If a light fixture is prone to shaking, the constant vibrations can cause the light bulb to burn out. Vibrations are a common problem for ceiling fans and garage door openers. There isn’t much that can be done to prevent vibration in light fixtures. However, to increase the life span of the light bulb, use an LED light bulb that is not so sensitive to vibrations.
Light Bulbs Are Too Tight or Stuck in Fitting
One common reason why light bulbs will burn out is when the light bulbs are screwed in too tight. The light bulb bottom can cause the metal connection tab to depress. When the tabs are depressed, the energy flow can be interrupted and cause flickering and eventually burn out the light bulb. When screwing in a light make sure not to screw it in too tightly.
Loose Wiring or Electrical Connection
When the wiring to the light fixture has been damaged or the connection has been pulled apart slightly, this can cause a number of problems. One common issue is when the light bulbs keep burning out. The wiring can overload or overheat if the energy flow is interrupted. Another common sign of a loose connection is flickering lights, the light switch feels hot and the circuit breaker keeps tripping. It is recommended to have a licensed electrician inspect the home’s wiring for loose connections or damage. Not only will it stabilize the power flow, it also ensures the home’s safety.
Too Much Voltage
At times a home may be receiving too much voltage. When a home has too much voltage, the entire house will have electrical problems, including light bulbs burning out. If more than one area of the home has its light bulbs burning out, this is a common sign there is too much voltage flowing into the home. It will require a professional electrician to determine the high voltage source and what needs to be done to correct the problem.
Electrical Services in Delray Beach, Palm Beach Gardens, Jupiter & Boca Raton & Palm Beach County Florida
If you require a professional electrical service to determine why your home’s light bulbs keep burning out or for any other electrical emergency, contact Simon Electric today.
